Light up any room with this 24V 5050 RGB strip at 96 LEDs/m—denser and brighter than standard 60LED/m tapes, yet still easy to run on a normal RGB controller. All LEDs change color together: red, green, blue, cyan, magenta, yellow, white plus millions of mixed shades via fade/flash/strobe modes. 24V operation means lower current, less heat and smaller voltage drop, so longer runs stay even and stable. Cuttable every 4 LEDs (41.6mm), self-adhesive, flexible PCB for cabinets, TVs, ceilings, bars and parties. No programming, just plug-and-play colorful ambiance.
96 LEDs/m High Density: Brighter and smoother than 60/m RGB strips, fewer dark gaps, great for cove and backlight use.
True 7-Color RGB: Red/Green/Blue/Cyan/Magenta/Yellow/White + blended colors via IR/RF/WiFi RGB controller.
24V Efficient System: Less current than 12V, reduced voltage drop, longer stable runs, cooler and safer operation.
Cut & Stick Easily: Cut every 4 LEDs (≈41.6 mm), 10/12mm PCB, 3M backing, bends around corners and profiles.
Universal RGB Control: Works with IR/RF/WiFi RGB controllers, RGB amplifiers, Alexa/Google smart modules—no coding required.
|
Item |
Specification |
|---|---|
|
LED Type |
SMD 5050 RGB (common anode) |
|
LED Density |
96 LEDs/m |
|
Voltage |
DC 24V |
|
Power |
~23 W/m (typical 18–23 W/m) |
|
Cut Unit |
Every 4 LEDs / 41.6 mm |
|
PCB Width |
10 mm / 12 mm optional |
|
Color |
RGB 7-color + mixed |
|
Control |
Non-addressable RGB controller (IR / RF / WiFi) |
|
Dimming |
PWM |
|
Beam Angle |
120° |
|
IP Rating |
IP20 / IP65 / IP67 optional |
|
Adhesive |
3M tape |
|
Working Temp. |
-20°C ~ +60°C |
|
Lifespan |
30,000 hrs |
|
Note |
Synchronized color only; not single-pixel addressable |
