One SPI/data output drives WS2811, WS2812B, WS2813, WS2814A, WS2815, SK6812, SM16703, TM1814, GS8208 and WS2805 strips, up to about 800 ICs. Input is DC5/12/24V, 10A max (240W @24V). A built-in MOSFET/relay cuts LED output when WLED is off to reduce ghost glow. It does NOT control analog RGB/RGBW/CCT strips and is not DMX-native. For one waterproof pixel run, the GL-C-012WL is the simplest WLED install GLEDOPTO makes.
IP65 Waterproof WLED: Sealed black housing + 300mm pigtail wires; rain-splash/dust/humidity safe for kitchen, bathroom niche, balcony, garden, aquarium.
ESP32 + WLED Out of Box: WLED-AP setup → home WiFi → WLED Native app / web UI / Home Assistant / MQTT; 100+ effects, segments, presets, Usermods.
Single Digital Output, 800 ICs: One DATA line for WS2811/WS2812B/WS2813/WS2814A/WS2815/SK6812/SM16703/TM1814/GS8208/WS2805; perfect for one strip or one zone.
5–24V / 10A Compact: DC5V/12V/24V only, 10A max, 240W@24V; 151×38×16mm or 109×52×36mm depending on batch—hidden easily behind trim.
Off-Glow Fixed: Built-in MOSFET/relay disables LED output when WLED is off; physical button: tap on/off, 1s color switch, 10s factory reset to WLED-AP.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-012WL (IP65) / GL-C-I-012WL |
|
MCU / Firmware |
ESP32 / WLED pre-installed |
|
Type |
Single-channel WLED digital/SPI controller |
|
Network |
2.4GHz WiFi only (no Ethernet, no ZigBee, no Matter) |
|
Smart Home |
WLED app/web UI, Home Assistant (WLED), MQTT, Alexa via WLED |
|
Input Voltage |
DC 5V / 12V / 24V |
|
Max Current |
10A |
|
Max Load Power |
240W @ 24V |
|
Max ICs |
~800 ICs on the single data output |
|
Output |
1 × SPI/TTL: V+ / DATA / GND |
|
Supported ICs |
WS2811, WS2811F, WS2812, WS2812B, WS2813, WS2814A, WS2815, SK6812, SK9822, TM1814, SM16703, SM16703SP3, GS8208, WS2805, FL19038, FW1935, UCS2903B |
|
Not Supported |
Analog RGB / RGBW / RGBCCT / CCT / dimmer; DMX512 native |
|
Off Control |
Built-in MOSFET/relay cuts LED output when off |
|
Button |
GPIO17: short press on/off, 1s color, 10s reset → WLED-AP |
|
Wires |
300mm pigtails: INPUT V+/V-/DATA/GND; OUTPUT V+/DATA/GND (color coding varies by batch) |
|
Ingress |
IP65 (rain splash / humidity; not immersion) |
|
Housing |
Sealed black plastic, flame-retardant |
|
Size / Weight |
151×38×16mm / 109×52×36mm (batch variance), ~132–170g |
|
Temp Range |
-20°C ~ +45°C |
|
Remote |
Optional GL-RC-001WL (WLED WiFi remote) |
|
Certification |
CE / RoHS (typical) |
