A built-in relay cuts LED V+ when off to kill ghost glow, while a pluggable 20A fuse guards against shorts. Input is DC5/12/24V, 10A per channel and 15A total (~360W @24V). Type-C supplies 5V/3A for service or flashing; IO13 is free for button/PIR/sensor projects. It does NOT control analog RGB/RGBW/RGBCCT/CCT strips and is not DMX-native. For WiFi-only WLED pixel projects, the GL-C-615WL is the cleaner, lower-cost sibling of the GL-C-616WL.
WiFi WLED, No Ethernet Needed: 2.4GHz WiFi + WLED-AP setup; full local control via WLED app / web UI / Home Assistant—no cloud, no hub, no RJ45 cable.
Dual Independent SPI Outputs: GPIO2 + GPIO16 drive two pixel strips/zones separately (TV + shelf, left + right cove, signage + accent).
Elite Protection Set: Energy-saving relay (GPIO18) cuts LED power off-state; 20A pluggable fuse (some boxes ship 5A spare—use 20A rating); input reverse-polarity protection.
Audio-Reactive Out of Box: Onboard PDM mic (I²S SD GPIO32 / WS GPIO15) for music sync; IO13 DIY GPIO; Function button GPIO17 (tap on/off, 1s color, 10s reset).
Maker-Friendly Power: DC5–24V screw terminal or 5.5×2.1mm jack; Type-C 5V/3A for flash/service; 129×50×23mm flame-retardant PC, IP20 indoor.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-615WL (Elite 2D-MU Advanced WLED Controller) |
|
Also Listed As |
GL-C-I-615WL |
|
MCU / Firmware |
ESP32 / WLED pre-installed |
|
Network |
2.4GHz WiFi 802.11 b/g/n — no Ethernet (616WL has RJ45) |
|
Smart Home |
WLED app, Home Assistant (WLED integration), MQTT, HTTP/JSON, WebSocket, sACN/E1.31, Art-Net-style sync |
|
Input Voltage |
DC 5V / 12V / 24V |
|
Max Output Current |
15A total, 10A per channel |
|
Max Load Power |
~360W @ 24V |
|
LED Outputs |
2 × SPI/TTL: V+/GPIO2/GND, V+/GPIO16/GND |
|
Supported ICs |
WS2811, WS2812, WS2812B, WS2813, WS2815, SK6812, SK9822, TM1814, SM16703, UCS2903B, WS2805, etc. |
|
Not Supported |
Analog RGB / RGBW / RGBCCT / CCT / single-color PWM; DMX512 native (needs decoder/Art-Net) |
|
Relay |
Yes, Relay GPIO18 (default) — cuts LED V+ when off |
|
Fuse |
Pluggable 20A (some retail boxes say 5A spare; device spec = 20A) |
|
Mic |
Built-in PDM/I²S mic for Audio Reactive |
|
DIY GPIO |
IO13 (button / PIR / sensor) |
|
Function Button |
GPIO17: short press on/off, 1s color switch, 10s factory reset → WLED-AP |
|
Power Input |
V+/V- terminal, 5.5×2.1mm DC jack, Type-C 5V/3A (flash/service) |
|
Housing / IP |
Flame-retardant PC/ABS, IP20 |
|
Size / Weight |
129 × 50 × 23 mm / ~70–81 g |
|
Temp Range |
-20°C ~ +45°C |
|
Remote |
Optional GL-RC-001WL (WLED RF remote) |
|
Certification |
CE / RoHS (typical) |
