Lever/quick-connect terminals accept 0.3–2mm² wire for fast, screwdriver-light installs; a 5.5×2.1mm DC jack powers the board up to 3A. PWM frequency is switchable 600/800/1000/2000/4000/8000Hz to kill camera flicker and PSU whine, and power-on behavior can be set to last-state or default-on. It is NOT for WS2812B/SK6812/WS2815/DMX addressable strips, and NOT a WLED controller—this is the ZigBee brain for traditional analog LED tape.
20A Pro+ Current: 15A/ch, 20A total → 480W@24V; long residential/commercial analog strips without external MOSFET boards.
ZigBee 3.0 + RF + Push: Hue/HA/SmartThings/Homey/Z2M; 2.4G RF remote; external push-dim switch on the same controller.
True 5-in-1 PWM: Dimmer / CCT / RGB / RGBW / RGBCCT; Opt button cycles modes, indicator shows red/green/blue/yellow/white.
Installer Wiring: Lever or quick-connect terminals (0.3–2mm²), 5.5×2.1mm DC jack, 108×45×18mm, double-side tape mount, IP20 indoor.
Pro Tuning: 600–8000Hz PWM, power-fail memory, ZigBee mesh repeater (~31m range), flame-retardant PC.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-201P（ZigBee Pro+ 5-in-1） |
|
Protocol |
ZigBee 3.0 + 2.4GHz RF（no WiFi, no WLED, no Tuya cloud） |
|
Type |
Constant-voltage PWM 5-in-1 analog controller |
|
Input Voltage |
DC 12–24V（some listings DC5–24V） |
|
Output Current/Ch |
15A max |
|
Total Output Current |
20A max |
|
Max Load Power |
240W@12V / 480W@24V |
|
Channels |
5 PWM: R / G / B / W(WW) / C(CW) |
|
Modes |
Dimmer / CCT / RGB / RGBW / RGBCCT |
|
PWM Frequency |
600 / 800 / 1000 / 2000 / 4000 / 8000 Hz |
|
Gateway Compatibility |
Philips Hue, Echo Plus, SmartThings, Homey, ConBee, ZHA, Zigbee2MQTT |
|
RF Remote |
Compatible GLEDOPTO 2.4G RF remote / touch panel |
|
Local Input |
External push button（press on/off, hold dim） |
|
Wiring |
Lever/quick-connect 0.3–2mm²; 5.5×2.1mm DC jack（board side ≤3A） |
|
Power-on Memory |
Last-state / default-on（long-press Opt ≥5s） |
|
Mesh |
ZigBee repeater, extended range ~31m per docs |
|
Housing / IP |
Flame-retardant PC, IP20 indoor |
|
Size / Weight |
108 × 45 × 18 mm / ~61 g |
|
Temp Range |
-20°C ~ +45°C |
|
Supported Strips |
Single-color, CCT, RGB, RGBW, RGBCCT SMD/COB constant-voltage |
|
Not Supported |
WS2811/WS2812B/SK6812/WS2815/TM1814/APA102/DMX512 addressable strips |
|
Note |
Tuya ZigBee hubs may block third-party ZigBee devices per some reseller docs |
|
Certification |
CE / UKCA / RoHS |
