The 41mm-low-profile metal case (225×124×41mm) mounts in LED driver cabinets, signage enclosures, AV racks and machine panels. A built-in long-life fan with intelligent speed control holds full load from -30°C to +70°C; efficiency reaches 93% (24V model) with conformal coating for humid sites. Protections cover short circuit, overload (>105% 5s shutdown, >150% constant-current limit), over voltage (29–36V) and over temperature. It can feed many 5m rolls of 14.4W/m tape, ~30m+ of 18W/m RGBW, or 25–30m of 30W/m COB with injection. For 24/7 use de-rate to 85% load (≈1020W / 42.5A). Not waterproof—mount indoors or in a ventilated enclosure.
1200W / 50A 24V Flagship: 24V DC, 0–50A, 1200W; 150% peak power for 5s (1800W/75A) for inrush-heavy LED/relay loads.
Wide AC Input + PFC: 180–305VAC / 255–431VDC, PF ≥0.95 @230VAC; no 115/230 slide switch, 277VAC site-ready.
41mm Low-Profile + Smart Fan: 225×124×41mm, 17W/in³, fan speed by internal temp (≈45dB @10% load, ≈53dB @70% load), conformal coating, 5000m altitude, OVC III.
Industrial Logic & Signals: Short / overload / OVP 29–36V / OTP; built-in Remote ON/OFF, Remote Sense (compensate up to 0.3V wire drop), DC OK signal; IEC/UL 62368-1, EN61558-1/-2-16, CB/CE/DEKRA/KC/CQC/EAC/UKCA.
Whole-Building LED Ready: Many 5m 14.4W/m rolls, ~30m+ 18W/m RGBW, 25–30m 30W/m COB (with injection); DMX/PWM controllers, CCTV, PLCs, signage, sensors on one supply.
|
Item |
Specification |
|---|---|
|
Model |
LRS-1200-24 |
|
Manufacturer |
MEAN WELL |
|
Series |
LRS-1200 (Enclosed, single output, SE-1000 replacement) |
|
Output Voltage |
24V DC |
|
Voltage Adjust Range |
24–28V |
|
Rated Current |
50A |
|
Rated Power |
1200W |
|
Peak Power |
1800W / 75A for 5s |
|
Input Voltage |
180–305VAC, 255–431VDC, 47–63Hz（277VAC capable） |
|
Power Factor |
≥0.95 @230VAC, ≥0.93 @277VAC |
|
Efficiency |
93% typ（24V model；36/48V 94%） |
|
Ripple & Noise |
240mVp-p max |
|
Inrush Current |
60A @230VAC, 75A @277VAC |
|
No-Load Power |
Low（datasheet class, <1W level） |
|
Protections |
Short circuit（shutdown/recover）; Overload >105% 5s shutdown, >150% constant-current limit 5s shutdown; OVP 29–36V shutdown+repower; OTP shutdown+repower |
|
Cooling |
Forced air, built-in DC fan, intelligent speed control |
|
Functions |
Remote ON/OFF（RC+~RC- 0–0.8V ON, 3.3–10V OFF）, Remote Sense（≤0.3V drop comp）, DC OK（3.3–5.6V ON / 0–1V OFF） |
|
Operating Temp |
-30°C ~ +70°C（derating above 50°C） |
|
Humidity |
20–90% RH non-condensing |
|
Altitude |
Up to 5000m（OVC III） |
|
Coating |
Conformal coating（humid/dusty sites） |
|
Safety |
IEC/UL 62368-1, EN61558-1/-2-16, AS/NZS 62368-1, KC, CQC GB4943.1, BSMI, EAC, CB, CE, UKCA |
|
Isolation |
I/P-O/P 4.2kVac, I/P-FG 2.1kVac, O/P-FG 1.25kVac |
|
Vibration |
10–500Hz, 3G, X/Y/Z 60min each |
|
Terminals |
Screw terminal block（AC L/N/FG, DC +/- multi-post） |
|
Housing / IP |
Metal case, IP20 indoor |
|
Dimensions |
225 × 124 × 41 mm (L×W×H) |
|
Weight |
~1.28 kg |
|
Continuous Load Rule |
De-rate to 85% → ≈1020W / 42.5A for 24/7 |
|
Typical Use |
Whole-shop/whole-cabinet 24V LED strips, RGBW/CCT/COB, DMX/PWM controllers, signage, CCTV, PLC, industrial automation |
|
Not For |
Outdoor exposed use, 12V strips, non-dimmable AC lamps, very long 40W/m COB without injection/amplifier/distribution |
|
Warranty |
3 years |
