Input/output is AC100–240V, 1.5A max, up to 400W@220V / 200W@110V for incandescent and 200W@220V / 100W@110V for dimmable LED loads. Control it from a ZigBee hub (Philips Hue, SmartThings, Tuya ZigBee, Echo Plus, ConBee, Hubitat, Home Assistant ZHA/Z2M), a GLEDOPTO 2.4G RF remote, a push wall switch, or the onboard Level/Reset buttons—no hub required for local use. Minimum brightness is adjustable to stop low-end flicker; soft on/off protects lamps. Do NOT connect non-dimmable fixtures—they can spike current and damage the module. It cannot drive 12V/24V LED tape and cannot control WS2812B/SK6812/DMX pixels.
Mains Triac Dimmer, Not DC Controller: AC100–240V in/out, 1ch, trailing-edge dimming for dimmable bulbs/drivers/lamps.
ZigBee 3.0 + 2.4G RF + Push: Hue / SmartThings / Tuya / ConBee / Hubitat / HA; RF remote and push switch work without a hub.
In-Wall Mini Size: 48×45×21mm, screw terminals up to 2.5mm², fits 86mm / EU flush boxes behind existing switch plates.
Load-Safe Tuning: Min-brightness setting, 1–100% dim range, soft power on/off, overheat protection, TouchLink up to 30 ZigBee remotes.
Right Product, Right Load: For AC dimmable lighting; NOT for 12V/24V RGB/RGBCCT tape, NOT for SPI/DMX addressable strips.
|
Item |
Specification |
|---|---|
|
Model |
GL-SD-001 |
|
Type |
ZigBee 3.0 Trailing-Edge Triac AC Dimmer |
|
Protocol |
ZigBee 3.0 + 2.4GHz RF |
|
Input / Output |
AC 100–240V |
|
Output Channels |
1 channel（AC phase-cut） |
|
Max Output Current |
1.5A |
|
Max Load |
400W@220V / 200W@110V incandescent & HV halogen；200W@220V / 100W@110V dimmable LED & dimmable driver & LV-halogen w/ electronic transformer |
|
Dimming |
Trailing edge（phase-cut）, 1%–100%（min brightness adjustable） |
|
Control |
ZigBee hub, Alexa/Google voice, APP, push switch, Level/Reset buttons, 2.4G RF remote |
|
Hub Compatibility |
Philips Hue, SmartThings, Tuya ZigBee, Echo Plus, ConBee II, Hubitat, Homey, Home Assistant ZHA/Z2M |
|
Pairing |
ZigBee network join, TouchLink（≤10cm, up to 30 remotes）, Find-and-Bind, 2.4G RF pairing |
|
Buttons |
Level（short=on/off, long=dim）, Reset（long=min brightness, 5×short=factory reset） |
|
Wiring |
Screw terminals L/N in, OUT L/N, PUSH；max 2.5mm²；strip 9–10mm |
|
Protection |
Power-off protection, overheat protection |
|
Housing / IP |
Fireproof ABS/PC, IP20 indoor |
|
Size / Weight |
48 × 45 × 21 mm / ~40g |
|
Temp Range |
-20°C ~ +60°C |
|
Supported Loads |
Dimmable LED lamps, dimmable LED drivers, incandescent, HV halogen, LV halogen w/ electronic transformer |
|
Not Supported |
Non-dimmable bulbs/fixtures; 12V/24V LED strips; RGB/RGBW/RGBCCT tape; WS2812B/SK6812/WS2815/DMX pixels |
|
Certification |
CE / EMC / LVD / RoHS |
