Input spans DC5/12/24/36/48V, 10A per channel and 15A total, so it handles landscape lighting, aquarium terrarium strips, deck rails, signage and retail pixel runs. A built-in relay cuts LED power when off, the fuse protects against shorts, and ESP-NOW supports GLEDOPTO WLED RF remotes without a WiFi network. It controls WS2811/WS2812B/WS2813/WS2814A/WS2815/SK6812/SM16703/TM1814/WS2805/UCS2903B—never analog RGB/RGBW/CCT strips, and not DMX-native.
IP67 Waterproof WLED: Sealed flame-retardant PC body for outdoor, landscape, aquarium, terrace and commercial installs—unlike IP20 indoor WLED controllers.
Dual Independent Digital Outputs: Two SPI/data channels, up to 800 ICs per channel (1600 total); run TV+cabinet, left+right cove, or two signage strips with separate WLED segments.
Wide 5–48V / 15A: 5V/12V/24V/36V/48V pixel systems; 10A/ch, 15A total (~720W @48V). Long runs still need power injection.
Fuse + Relay + Mic: Pluggable fuse, energy-saving relay (kills ghost glow when off), built-in mic for AudioReactive effects, ESP-NOW remote support.
No Cloud, HA-Ready: WLED web UI / WLED Native app, Home Assistant, MQTT, ESP-NOW; WiFi 2.4GHz only. Not Tuya/ZigBee/Matter.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-812WL (AquaX WL1) / GL-C-I-812WL = IP67 version |
|
MCU / Firmware |
ESP32 / WLED pre-installed |
|
Type |
Dual-channel WLED digital/SPI controller |
|
Network |
2.4GHz WiFi + ESP-NOW (no Ethernet, no ZigBee) |
|
Smart Home |
WLED app/web UI, Home Assistant (WLED integration), MQTT, ESP-NOW remotes |
|
Input Voltage |
DC 5V / 12V / 24V / 36V / 48V |
|
Max Output Current |
15A total, 10A per channel |
|
Recommended ICs |
Up to 800 ICs/channel, 1600 ICs total |
|
Outputs |
2 × digital: V+ / DATA / GND |
|
Supported ICs |
WS2811, WS2811F, WS2812B, WS2813, WS2814A, WS2815, SK6812, SM16703, SM16703SP3, TM1814, GS8208, WS2805, FL19038, FW1935, UCS2903B |
|
Not Supported |
Analog RGB / RGBW / RGBCCT / CCT / dimmer; DMX512 native |
|
Protection |
Fuse, relay (cut LED V+ off-state), flame-retardant PC |
|
Mic |
Yes, AudioReactive |
|
Ingress |
IP67 |
|
Housing |
Flame-retardant PC, black |
|
Wiring |
Input 2×2.5mm² (~25cm), Output 3×1.0mm² (~30cm) |
|
Weight |
~0.28 kg |
|
Temp Range |
-20°C ~ +45°C |
|
Remote |
GL-RC-001WL / GL-RC-002WL (WLED/ESP-NOW) |
|
Certification |
CE / RoHS (typical) |
