WLED boots pre-installed with 100+ effects, segments, palettes, audio-reactive mic, MQTT and Home Assistant native integration—fully local, no cloud. Input spans DC5/12/24/36/48V, 10A per channel and 15A total (up to 720W @48V). A pluggable 20A fuse, energy-saving relay and flame-retardant PC shell make pro installs safe; WAGO/quick-connect terminals and Type-C 5V/3A service port speed up wiring and flashing. It controls WS2811/WS2812B/WS2813/WS2814/WS2815/SK6812/SK9822/TM1814/SM16703/WS2805 and similar ICs. Not for analog RGB/RGBW/RGBCCT/CCT strips and not DMX-native.
6 Independent Digital Outputs: IO16 / IO14 / IO13 / IO12 / IO4 / IO2—six pixel strips or six WLED segments from one ESP32, no extra controllers for multi-zone RGBIC.
Ethernet + WiFi: RJ45 for stutter-free Art-Net/sACN/Hyperion/xLights sync; WiFi for quick provisioning. Local LAN control, no Tuya/ZigBee hub.
Wide 5–48V / 15A: 75W@5V · 180W@12V · 360W@24V · 540W@36V · 720W@48V; long pixel runs still need power injection, but controller pass-through is wide-range.
Elite Protection Set: 20A pluggable fuse, energy-saving relay (GPIO18) cuts LED V+ when off, PDM mic for music sync, IO ports for buttons/PIR/sensors, Type-C UART flash.
HA / Maker Native: WLED app + web UI, Home Assistant WLED integration, MQTT, REST/WebSocket, ESP-NOW sync across multiple GLEDOPTO WLED units, Usermods supported.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-619WL (Elite 6D-EXMU Advanced WLED Controller) |
|
MCU / Firmware |
ESP32 / WLED pre-installed (GLEDOPTO custom presets) |
|
Network |
RJ45 10/100Mbps Ethernet + 2.4GHz WiFi 802.11 b/g/n |
|
Smart Home |
WLED app/web UI, Home Assistant (WLED integration), MQTT, Alexa/Google via WLED, sACN/E1.31, Art-Net-style, Hyperion, xLights |
|
Input Voltage |
DC 5V / 12V / 24V / 36V / 48V |
|
Type-C Input |
5V / 3A max (service/flash, not PC USB) |
|
DC Jack |
5.5×2.1mm, ≤3A |
|
Max Output Current |
15A total, 10A per channel |
|
Max Load Power |
720W @ 48V |
|
Digital Outputs |
6 × SPI/TTL: IO16, IO14, IO13, IO12, IO4, IO2 (shared V+ / GND) |
|
Recommended Max |
~1600 ICs per output in typical WLED config (total MCU/RAM bound) |
|
Supported ICs |
WS2811, WS2812, WS2812B, WS2813, WS2814, WS2815, SK6812, SK9822, TM1814, SM16703(P), UCS2903B, WS2805, etc. |
|
Mixed ICs |
WLED can set each bus/output to a different supported chipset |
|
Not Supported |
Analog RGB / RGBW / RGBCCT / CCT / dimmer PWM; DMX512 native (needs decoder/Art-Net) |
|
Relay |
Yes, GPIO18 inverted—cuts LED power when off |
|
Fuse |
Pluggable 20A (some boxes include 5A spare) |
|
Mic |
Built-in PDM mic (I²S SD GPIO32 / WS GPIO15) for Audio Reactive |
|
Function Button |
GPIO17: tap on/off, 1s color switch, 10s reset → WLED-AP |
|
Wiring |
WAGO/quick-connect + V+/V- screw terminal |
|
Housing / IP |
Flame-retardant PC, IP20 indoor |
|
Size / Weight |
129 × 50 × 23 mm / ~110–113 g |
|
Temp Range |
-20°C ~ +45°C |
|
Certification |
CE / EMC / FCC / LVD / RoHS (typical) |
