Two independent SPI outputs (GPIO2 / GPIO16) drive two LED zones or two strips from one device, while a built-in relay cuts LED power when off and a replaceable fuse protects against short circuits. It runs WLED out of the box—100+ effects, segments, palettes, audio-reactive mic, MQTT, ESP-NOW and Usermods. Input is DC5/12/24V (15A total, 10A/ch), with Type-C for 5V debug/flash. Not for analog RGB/RGBW strips. For makers and integrators who want WiFi convenience plus Ethernet reliability, the GL-C-616WL is the elite-grade WLED brain.
Ethernet + WiFi Dual Network: RJ45 plug-and-play for stable/low-latency installs; WiFi for quick setup. WLED works fully local—no cloud, no gateway.
Dual Independent SPI Outputs: GPIO2 + GPIO16 control two pixel strips/zones separately—perfect for left/right cove, TV+ shelf, or main+accent runs.
Elite Protection Set: Software relay (GPIO18) kills standby glow on output side; replaceable blade fuse (5A/20A depending on batch) guards against overcurrent; reverse-polarity protection on input.
Audio-Reactive WLED Native: Onboard I²S digital mic enables music-sync effects; full WLED feature set—segments, presets, palettes, MQTT, Home Assistant, ESP-NOW wireless sync.
Maker/Integrator Ready: IO13 DIY port for button/PIR/sensor, Type-C UART flash, 5–24V wide input, 15A total load, IP20 flame-retardant housing for hidden professional installs.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-616WL (Elite 2D-EXMU) |
|
MCU / Firmware |
ESP32 / WLED pre-installed |
|
Network |
RJ45 Ethernet (Gledopto Series with Ethernet) + 2.4GHz WiFi 802.11 b/g/n |
|
Smart Home |
Home Assistant / MQTT / ESP-NOW (no Tuya/ZigBee) |
|
Input Voltage |
DC 5V / 12V / 24V |
|
Max Output Current |
15A total, 10A per channel |
|
Max Load Power |
~360W @ 24V |
|
LED Outputs |
2 × SPI/TTL: V+/GPIO2/GND, V+/GPIO16/GND |
|
Supported ICs |
WS2811, WS2812B, WS2813, WS2815, SK6812, SK9822, TM1814, SM16703, UCS2903B, APA102, etc. |
|
Not Supported |
Analog RGB / RGBW / RGBCCT / DMX512 (needs decoder) |
|
Relay |
Yes, Relay GPIO18 (invert) — cuts LED V+ when off |
|
Fuse |
Replaceable blade fuse (5A or 20A per batch) |
|
Mic |
Onboard I²S PDM mic (GPIO32/15) for Audio Reactive |
|
DIY GPIO |
IO13 (button / PIR / sensor) |
|
Power Inputs |
Screw terminal V+/V-, 5.5×2.1mm DC jack, USB-C 5V/3A (debug/flash) |
|
Function Button |
Short press on/off, 1s color switch, 10s reset to WLED-AP |
|
Housing |
Flame-retardant PC/ABS, IP20 |
|
Dimensions / Weight |
129 × 50 × 23 mm / ~78–87 g |
|
Temp Range |
-20°C ~ +45°C |
|
Remote |
Optional GL-RC-001WL (WLED RF, not ZigBee/2.4G RGB remote) |
|
Certification |
CE / EMC / FCC / LVD / RoHS (typical) |
