Join a ZigBee 3.0 mesh via Philips Hue, Echo Plus, SmartThings, Tuya, ConBee, Hubitat, Homey or Zigbee2MQTT, or run it with a GLEDOPTO 2.4G RF remote / wall panel / push-dim switch when no hub is present. OPT cycles modes with colored indicators; Reset cycles PWM 600–8000Hz to cut flicker and PSU hum; long-press OPT toggles power-fail memory. It is NOT for WS2812B/SK6812/WS2815/DMX addressable strips, and NOT a WLED controller—this is the tiny ZigBee brain for traditional analog LED tape.
Ultra Mini 42×38×17mm: Fits 86mm / EU flush wall boxes, switch backboxes, furniture cavities, signage junction boxes—hidden installs where 108mm Pro+ boxes won’t fit.
ZigBee 3.0 + 2.4G RF + Push: Hue / SmartThings / Tuya / ConBee / Hubitat / Homey / HA(ZHA/Z2M); RF remote works with no hub; momentary push switch supported.
True 5-in-1 PWM: RGBCCT / RGBW / RGB / CCT / Dimmer; OPT button + indicator (White/Yellow/Blue/Green/Red) shows active mode, no app needed for basic setup.
10A Mini Power: 6A/ch, 10A total, 240W@24V; bigger than GL-C-002P’s 6A total, smaller than GL-C-201P’s 20A total.
Installer Details: Spring/push terminals 0.5–1.5mm² (24–16AWG), strip 8–9mm, PWM 600/800/1000/2000/4000/8000Hz, power-fail memory, IP20, fireproof PC.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-301P（ZigBee Pro+ Ultra Mini 5-in-1） |
|
Protocol |
ZigBee 3.0 + 2.4GHz RF（no WiFi, no WLED, no Tuya cloud lock-in） |
|
Type |
Constant-voltage PWM 5-in-1 analog controller |
|
Input Voltage |
DC 12–24V（some resellers list 5–24V；上架建议写 12–24V） |
|
Output Current/Ch |
6A max |
|
Total Output Current |
10A max |
|
Max Load Power |
72W@12V / 144W@24V（若按 5–24V 资料，24V 下 240W 说法来自 6A×5ch 口径，但总电流 10A → 240W@24V 成立） |
|
Modes |
RGBCCT / RGBW / RGB / CCT / Dimmer |
|
Indicator |
White=RGBCCT, Yellow=RGBW, Blue=RGB, Green=CCT, Red=Dimmer |
|
PWM Frequency |
600 / 800 / 1000(default) / 2000 / 4000 / 8000 Hz |
|
Gateway Compatibility |
Philips Hue, Echo Plus, SmartThings, Tuya/SmartLife ZigBee, ConBee II, Hubitat, Homey, Terncy, Home Assistant ZHA/Z2M |
|
Local Control |
GLEDOPTO 2.4G RF remote / wireless wall panel; push-dim switch |
|
Buttons |
OPT（short=mode+clears ZigBee/RF, 5s=power-fail memory）, Reset（short=PWM freq, 5s=factory→RGBCCT）, Push（on/off + long-press dim） |
|
Wiring |
Spring/push terminals 0.5–1.5mm² (24–16AWG), strip 8–9mm; V+ / R / G / B / C(WW) / W(CW) |
|
Power-on Memory |
Off by default; long-press OPT 5s toggles last-state / default-on |
|
Housing / IP |
Fireproof PC / ABS, IP20 indoor |
|
Size / Weight |
42 × 38 × 17 mm / ~20.3g NW, ~24–28g GW |
|
Temp Range |
-20°C ~ +45°C |
|
Supported Strips |
RGBCCT, RGBW, RGB, CCT, single-color dimmable constant-voltage |
|
Not Supported |
WS2811/WS2812B/SK6812/WS2815/TM1814/APA102/DMX512 addressable strips |
|
Certification |
CE / EMC / LVD / RoHS |
