Join a ZigBee 3.0 mesh via Philips Hue, Echo Plus, SmartThings, Homey, ZHA or Zigbee2MQTT, or control it directly with a GLEDOPTO 2.4G RF remote / wall switch / push-dim button when no hub is present. Lever/quick-connect terminals take 0.3–2mm² wire; a 5.5×2.1mm DC jack powers the board up to 3A. PWM frequency is switchable 600/800/1000/2000/4000/8000Hz to kill camera flicker and PSU whine, and power-on behavior can be set to last-state or default-on. It is NOT for WS2812B/SK6812/WS2815/DMX addressable strips, and NOT a WLED controller—this is the ZigBee brain for traditional analog LED tape.
Wide-Voltage 5-in-1: DC12–48V covers 24V LED tape and 48V constant-voltage panels; RGBCCT/RGBW/RGB/CCT/Dimmer in one box.
15A Total, 12A/Ch: 288W@24V / 576W@48V; longer analog runs than 12V-only controllers, but not as brute as 201P’s 20A total.
ZigBee 3.0 + RF + Push: Hue/HA/SmartThings/Homey/Z2M; 2.4G RF remote; external push button for on/off + dim.
Installer Wiring: Lever/quick-connect 0.3–2mm², strip 10mm, 108×45×18mm, flame-retardant PC, IP20; OPT switches mode, Reset switches PWM frequency.
Flicker Tuning: 600–8000Hz PWM, power-fail memory, scene memory with RF remote, TouchLink pairing.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-204P（ZigBee Pro+ 5-in-1） |
|
Protocol |
ZigBee 3.0 + 2.4GHz RF（no WiFi, no WLED, no Tuya cloud lock-in） |
|
Type |
Constant-voltage PWM 5-in-1 analog controller |
|
Input Voltage |
DC 12–48V |
|
Output Current/Ch |
12A max |
|
Total Output Current |
15A max |
|
Max Load Power |
144W@12V / 288W@24V / 432W@36V / 576W@48V |
|
Modes |
Dimmer / CCT / RGB / RGBW / RGBCCT |
|
Indicator |
Red=Dimmer, Green=CCT, Blue=RGB, Yellow=RGBW, White=RGBCCT |
|
PWM Frequency |
600 / 800 / 1000 / 2000 / 4000 / 8000 Hz（default 1000Hz） |
|
Gateway Compatibility |
Philips Hue, Echo Plus, SmartThings, Homey, ConBee, ZHA, Zigbee2MQTT（Tuya ZigBee hub may block third-party ZigBee per GLEDOPTO notices） |
|
Local Control |
GLEDOPTO 2.4G RF remote / wall switch; push button on controller |
|
Buttons |
Reset（short=freq, 5s=factory）, OPT（short=mode, 5s=power-on setting）, Push（on/off + dim） |
|
Wiring |
Quick-connect/lever 0.3–2mm² (22–14AWG), strip 10mm; 5.5×2.1mm DC jack ≤3A |
|
Power-on Memory |
Last-state / default-on |
|
Housing / IP |
Flame-retardant PC, IP20 indoor |
|
Size / Weight |
108 × 45 × 18 mm / ~54.2g NW, ~64.8g GW |
|
Temp Range |
-20°C ~ +45°C |
|
Supported Strips |
Single-color, CCT, RGB, RGBW, RGBCCT SMD/COB constant-voltage + 12–48V LED panels |
|
Not Supported |
WS2811/WS2812B/SK6812/WS2815/TM1814/APA102/DMX512 addressable strips |
|
Certification |
CE / UKCA / RoHS |
