It runs on DC5–48V, passes up to 20A to the strip side, and can sit before an external power supply for long runs. A selector lets you tune output resistance—33Ω for bundled V+/DATA/GND cable, 249Ω for separate wires—so signal integrity matches your wiring. The device itself is transparent: no app, no network, no firmware to flash. Just screw in INPUT from the controller, OUTPUT to the strip, and long-run pixel projects stop glitching. Indoor IP20 flame-retardant PC body, 115×35×24mm, made for cabinets, coves, signage and architectural RGBIC runs.
Fixes Long-Run Pixel Glitches: Regenerates DATA signal to stop flicker, wrong colors, dropped pixels on cables up to ~10m from the amp output.
Wide 5–48V Pass-Through: Matches 5V/12V/24V/36V/48V pixel systems; 20A max on the strip/power side—voltage unchanged, just cleans and forwards data.
Tunable Output Resistance: 33Ω for bundled 3-in-1 cable, 249Ω for separated V+/DATA/GND—better signal matching than a dumb level shifter.
Transparent & Hub-Free: No WiFi, no ZigBee, no Matter, no WLED UI. Works behind any ESP32/ESP8266 WLED controller and keeps the main controller’s ecosystem intact.
Pro Install Form Factor: Flame-retardant PC, IP20, 115×35×24mm, screw terminals, optional external PSU on output side for long strips with power injection.
|
Item |
Specification |
|---|---|
|
Model |
GL-BS-001WL (also GL-BS-I-001WL) |
|
Type |
Digital LED signal amplifier / data repeater (not a controller) |
|
Firmware / Network |
None — no WLED, no WiFi pairing, no app |
|
Input Voltage |
DC 5V / 12V / 24V / 36V / 48V |
|
Max Output Current |
20A (power pass-through side) |
|
Function |
Regenerate + forward DATA signal; voltage not converted |
|
Input Terminals |
V+ / DATA IN / GND |
|
Output Terminals |
V+ / DATA OUT / GND |
|
Output Resistance |
33Ω (bundled cable) / 249Ω (separate wires) |
|
Max Extension |
~10m controller→amp or amp→strip per manual guidance |
|
Supported ICs |
WS2811, WS2812, WS2812B, WS2813, WS2815, SK6812, SM16703P, etc. |
|
Compatible Controllers |
GL-C-615WL / 616WL / 618WL / 619WL / 620WL and other WLED/ESP32 setups |
|
External PSU Mode |
Yes — separate PSU can feed V+/GND on output side for long strips |
|
Housing / IP |
Flame-retardant PC, IP20 indoor |
|
Size / Weight |
115 × 35 × 24 mm / ~50 g |
|
Temp Range |
-20°C ~ +45°C |
|
Certification |
CE / EMC / FCC / LVD / RoHS (typical) |
