This DC5V SK6812 8×32 matrix packs 256 addressable 5050 RGB pixels on a 80×320 mm flexible PCB—one IC per LED, 24-bit color, 256 gray levels per channel. Fully compatible with WS2812B/NeoPixel, it connects via 5V/GND/DIN for text, icons, rain, fire, spectrum and video effects driven by Arduino, ESP32/WLED, Raspberry Pi, T-1000S, K-1000C or Madrix. Panels chain via DOUT→DIN to build wider screens. 256 LEDs full white draw ~15A, so inject 5V power at each panel and stay within 5V. Ideal for KTV, bars, shops, makers and pixel-art walls.
256 Individually Addressable Pixels: 8×32 grid, 1 SK6812 IC = 1 LED, full 24-bit RGB, smooth animation and text effects.
WS2812B / NeoPixel Compatible: Single data line, works with Arduino, FastLED, WLED, Glediator, Madrix, T-series SD controllers.
Flexible 80×320 mm PCB: Bends around surfaces; black FPC, 10 mm pixel pitch, indoor use.
Chainable for Wide Screens: DOUT→DIN cascading; multiple panels create scrolling text, logos, pixel murals, DJ/stage visuals.
Maker & Commercial Ready: Perfect for signage, KTV, retail window, gaming room, art install—just plan 5V power injection.
|
Item |
Specification |
|---|---|
|
LED Type |
SMD 5050 RGB |
|
IC |
SK6812 (built-in, WS2812B-compatible) |
|
Resolution |
8 × 32 = 256 pixels |
|
Panel Size |
80 × 320 mm |
|
Pixel Pitch |
10 mm |
|
Voltage |
DC 5V (do NOT exceed 5V) |
|
Max Power |
~51 W / panel typical, up to 75–77 W full white |
|
Current |
~10–15 A at full white |
|
Gray Level |
256 / channel, 24-bit color |
|
Signal |
Single-wire NZR (DATA only) |
|
Interface |
5V / GND / DIN / DOUT |
|
PCB |
Flexible FPC or rigid option, black |
|
Beam Angle |
120° |
|
IP Rating |
IP20 / IP30 non-waterproof |
|
Controller |
Arduino, ESP32/WLED, Raspberry Pi, T-1000S, K-1000C, DMX+decoder, Madrix |
|
Cut |
Not cuttable (data/power traces run through panel) |
|
Temp. |
-20°C ~ +50°C |
|
Life |
30,000–50,000 hrs |
|
Note |
No breakpoint resume; 5V needs per-panel power injection on big builds |
