The glue-filled body stays flexible, diffuses light evenly, and protects ICs/LEDs from moisture and vibration. Cut at marked points, seal the end caps, and drive it with a UCS1903B/SPI controller. A contractor-grade strip for harsh-environment decorative lighting.
IP68 Glue-Filled: silicone potting / tube-fill, rain-proof, dust-proof, anti-vibration for outdoor use.
24V Long-Run Stable: lower current than 12V strips, less brightness loss over distance.
UCS1903B 10 Pixels/m: 6 LEDs per pixel, bold full-color chase/flow effects for facades and landscapes.
5050 RGB High Output: bright enough for architectural outline and nightscape projects.
Outdoor Install Ready: cut-mark sealed ends, mounting clips/brackets optional, SPI/UCS1903B controller supported.
|
Item |
Specification |
|---|---|
|
Model |
UCS1903B-5050RGB-60D-24V-10mm-IP68 |
|
LED Type |
SMD 5050 RGB |
|
IC Type |
UCS1903B (external IC, SPI) |
|
Input Voltage |
DC 24V |
|
LED Density |
60 LEDs/m |
|
Pixel Density |
10 pixels/m (6 LEDs / pixel) |
|
Cutting Unit |
6 LEDs ≈ 100 mm |
|
PCB Width |
10 mm FPC (2oz copper typical) |
|
Power |
≈ 14.2–14.4 W/m |
|
Current |
≈ 0.6 A/m @ 24V |
|
Gray Scale |
8-bit × 3CH (256/CH) |
|
Waterproof |
IP68, full silicone potting / glue-filled tube |
|
Signal Interface |
3–4 pin: VCC / GND / DIN (DOUT cascade) |
|
Controller |
UCS1903B / SPI addressable controller |
|
Beam Angle |
120° (softened by silicone) |
|
Working Temp. |
-25°C ～ +80°C |
|
Length |
5 m/reel (custom length available) |
|
Life Span |
30,000–50,000 h |
|
Application |
Facade, bridge, pool edge, landscape, outdoor signage, garden, hotel exterior |
IP68 note: end caps, cables, and mounting brackets must be properly sealed; not for continuous underwater depth-rated use unless specified as submersible grade.
