The one-piece solid silicone extrusion provides genuine IP67 waterproofing—dust-tight, immersion-safe, and UV-resistant for years of outdoor service. Operating on safe 12V DC at just 5W/m, it's energy-efficient and runs cool even in enclosed spaces. Perfect for stair nosings, handrail illumination, facade accent lines, landscape edging, and signage. The flexible silicone bends smoothly for curves and letters while maintaining its waterproof seal. With pre-installed end caps and 3M tape backing, installation is quick and clean. Choose the square profile that stays put and shines brilliantly—built for designers, contractors, and DIY pros alike.
📐 Square 6×6mm Profile: Flat sides prevent rolling in channels—sits flush and stable in grooves, slots, and aluminum profiles. Perfect for precision architectural installs.
💧 True IP67 Solid Extrusion: One-piece seamless silicone jacket, no glue joints. Dust-tight, waterproof to 1m, UV-stable, anti-yellowing for long-term outdoor use.
✨ Dot-Free COB Illumination: 480 LEDs/m in COB packaging create a continuous, spotless light line—no visible dots even at close range. Uniform 180° top emission.
⚡ 12V Safe & Low Power: DC 12V at only 5W/m—safe for residential and commercial outdoor use, compatible with solar/battery systems, minimal voltage drop.
🔧 Embeddable & Tool-Free Install: Fits Ø6mm+ grooves, pre-sealed ends, 3M backing + mounting clips included. Cut every 50mm and re-seal with silicone for custom lengths.
Product Specification Sheet — 6×6mm Square Solid Silicone COB LED Strip
|
Category |
Item |
Specification |
|---|---|---|
|
General |
Product Type |
6×6mm Square Solid Silicone COB LED Strip |
|
Cross-Section |
6mm × 6mm (W × H), square profile |
|
|
LED Technology |
COB (Chip-on-Board) |
|
|
LED Density |
480 LEDs/m |
|
|
Electrical |
Input Voltage |
DC 12V (Constant Voltage) |
|
Power Consumption |
5W/m (25W / 5m roll) |
|
|
Current |
~0.42A/m @ 12V |
|
|
Cuttable Unit |
Every 50mm (approx. every 24 chips) |
|
|
Optical |
Color Temperature |
2700K / 3000K / 4000K / 6000K (Single CCT) |
|
CRI (Ra) |
≥90 (High Color Rendering) |
|
|
Luminous Efficacy |
90–100 lm/W |
|
|
Beam Angle |
180° (top emission, uniform) |
|
|
Feature |
Dot-free, no dark spots, soft uniform glow |
|
|
Physical |
Jacket Material |
Solid silicone rubber (milky white diffuser) |
|
Core PCB |
5mm wide FPCB (centered) |
|
|
Roll Length |
5m / roll (custom lengths available) |
|
|
Min. Bending Radius |
≥ 15mm (side bend) |
|
|
Waterproof |
IP Rating |
IP67 (solid silicone extrusion, seamless) |
|
Max Immersion |
≤1m depth |
|
|
UV Resistance |
Yes, anti-yellowing (outdoor grade) |
|
|
Salt Spray |
Pass (coastal rated) |
|
|
Environment |
Operating Temp. |
-40℃ to +60℃ |
|
Lifespan |
30,000–50,000 hours |
|
|
Installation |
Mounting |
3M tape on back + plastic/stainless clips (included); embed in 6mm+ groove |
|
Bending |
Side bend only (not face-bend) |
|
|
End Sealing |
Pre-sealed; field cuts require silicone sealant + end cap |
|
|
Application |
Stair nosing, handrail, facade line, landscape edge, cove, cabinet, signage, bridge, marine dock, architectural accent |
