The 10×10mm square profile delivers a broader beam and higher mechanical strength than slim strips, while the gas-phase silicone resists yellowing, cracking, and UV degradation for years of outdoor service. Flexible enough to follow curves, tough enough for driveways, pools, and building facades. Cut at marked intervals and reseal with molded caps. Whether you're illuminating a hotel exterior, a garden path, or a marine deck, this strip brings architectural-grade linear lighting to the toughest environments. Engineered to disappear. Built to endure.
🛡️ True IP67 — Molded End Cap Seal — One-piece gas-phase silicone extrusion with factory-molded end caps creates a fully hermetic seal; dust-tight, waterproof to 1m submersion, and corrosion-resistant for permanent outdoor use.
✨ 480 COB LEDs & Dot-Free Output — High-density COB chips deliver a continuous, seamless ribbon of light with zero hotspots or pixelation; front-emitting for direct, uniform surface illumination.
🌡️ Gas-Phase Silicone — UV & Aging Resistant — Premium gas-phase (platinum-cured) silicone resists yellowing, cracking, and ozone degradation; maintains flexibility from -40°C to +80°C for decade-long outdoor service.
⚡ 24V Stable & 10W/m Efficient — 24V operation minimizes voltage drop on long runs (up to 10m+ without booster); 10W/m balances brightness with thermal efficiency; compatible with standard outdoor 24V drivers.
📐 10×10mm Robust & Flexible — Square 10×10mm profile provides mechanical rigidity and broad beam spread; bendable to a 100mm radius; cuttable at marked intervals with resealable molded caps; mounts via clips or channels.
|
Specification |
Details |
|---|---|
|
Product Name |
10×10mm COB LED Strip Light (IP67 Gas-Phase Silicone) |
|
Model |
1010-COB-24V-480D-IP67 |
|
Cross-Section |
10mm × 10mm (W × H) |
|
LED Type |
COB (Chip on Board) |
|
LED Density |
480 LEDs/m |
|
Emitting Mode |
Front emitting (top), 180° beam angle |
|
Operating Voltage |
DC 24V |
|
Power Consumption |
10W/m |
|
Color Options |
2700K / 3000K / 4000K / 5000K / 6000K; Amber 1800K available |
|
CRI |
Ra ≥ 90 (CCT versions) |
|
Luminous Flux |
~900–1100 lm/m (depending on CCT) |
|
Dimming |
PWM dimmable (0–100%) |
|
Housing |
Continuous gas-phase silicone extrusion (platinum-cured) |
|
End Cap |
Factory-molded, hermetically sealed (IP67 rated) |
|
IP Rating |
IP67 (dust-tight, waterproof to 1m depth) |
|
UV Resistance |
Excellent (gas-phase silicone, non-yellowing) |
|
Chemical Resistance |
Salt spray, ozone, acid rain resistant |
|
Cuttable Unit |
Every 50mm (at marked intervals, reseal with end cap) |
|
Bending Radius |
≥ 100mm |
|
Working Temp. |
-40°C ~ +80°C (extended range) |
|
Lifespan |
≥ 50,000 hours |
|
Certifications |
CE, RoHS, IP67 certified, LM-80 |
|
Mounting |
Stainless steel clips / aluminum channel / surface screw |
|
Applications |
Building facade, landscape lighting, pool perimeter, driveway, stair, step, handrail, marine deck, bridge, tunnel, outdoor signage |
|
Warranty |
3 Years |
