Rated 5A per channel and 15A total, it handles 270W@54V, 360W@24V-class loads under voltage-limited current, or distributed multi-zone 12V/24V runs from a central PSU. Join Philips Hue, Echo Plus, SmartThings, Tuya, ConBee, Hubitat, Homey or Home Assistant ZHA/Zigbee2MQTT, or control it with a GLEDOPTO 2.4G RF remote / wall panel with no hub. OPT cycles modes with colored indicators; Reset steps PWM 600/800/1000/2000/4000/8000Hz to kill flicker and PSU hum; long-press OPT sets power-on state. It is NOT for WS2812B/SK6812/WS2815/DMX addressable strips, and NOT a WLED controller—this is the panel-mount ZigBee brain for traditional analog LED tape.
DIN-Rail 5-in-1: 91×36×59mm, clips on 35mm rail; centralizes RGBCCT/RGBW/RGB/CCT/Dimmer control inside the breaker panel / LED power cabinet.
12–54V Wide DC: One SKU covers 12V RGB, 24V RGBCCT, 36V/48V/54V constant-voltage linear lights—no need for separate 12–24V and 12–48V boxes.
ZigBee 3.0 + 2.4G RF: Hue / SmartThings / Tuya / ConBee / Hubitat / Homey / HA; GLEDOPTO RF remote works hub-free; TouchLink + Find-and-Bind.
Engineer Tuning: 5A/ch, 15A total, PWM 600–8000Hz, power-fail memory, 16M colors, 2700–6500K CCT, IP20 fireproof PC.
Voltage-Aware Load Limit: 12/24V≈10A total, 36V 7.5A, 48V 5.6A, 54V 5A—datasheet-safe sizing, longer runs need PSU injection or GL-BS-class amplifier.
|
Item |
Specification |
|---|---|
|
Model |
GL-C-011P（DIN Rail 5-in-1） |
|
Protocol |
ZigBee 3.0 + 2.4GHz RF（no WiFi, no WLED） |
|
Type |
Constant-voltage PWM 5-in-1 analog controller |
|
Mount |
35mm DIN rail |
|
Input Voltage |
DC 12 / 24 / 36 / 48 / 54V |
|
Output Current/Ch |
5A max |
|
Total Output Current |
15A max（channel-limited 5A/ch） |
|
Voltage-Limited Total |
12V:10A / 24V:10A / 36V:7.5A / 48V:5.6A / 54V:5A |
|
Max Load (simple) |
270W listed in some manuals；54V×5A=270W, 24V×10A=240W, 12V×10A=120W |
|
Modes |
Dimmer / CCT / RGB / RGBW / RGBCCT |
|
Indicator |
Red=Dimmer, Green=CCT, Blue=RGB, Yellow=RGBW, White=RGBCCT |
|
PWM Frequency |
600 / 800 / 1000(default) / 2000 / 4000 / 8000 Hz |
|
Gateway Compatibility |
Philips Hue, Echo Plus, SmartThings, Tuya/SmartLife, Osram Lightify, ConBee II, Hubitat, Homey, Terncy, Home Assistant ZHA/Z2M |
|
Local Control |
GLEDOPTO 2.4G RF remote / RF wall panel；OPT + Reset buttons |
|
Buttons |
OPT（short=mode, 5s=power-on state）, Reset（1×freq, 2×find/bind, 3×TouchLink, 4×clear ZigBee） |
|
Wiring |
Screw/terminal block, common-anode constant-voltage；R/G/B/W/C/WW/V+ |
|
CCT Range |
~2700K–6500K（some docs 2000K–6500K） |
|
Housing / IP |
Fireproof PC/ABS, IP20 indoor |
|
Size |
91 × 36 × 59 mm（L×W×H；some pages write 91×59×36） |
|
Temp Range |
-20°C ~ +45°C（some resellers +60°C） |
|
Supported Strips |
Single-color, CCT, RGB, RGBW, RGBCCT SMD/COB constant-voltage 12–54V |
|
Not Supported |
WS2811/WS2812B/SK6812/WS2815/TM1814/APA102/DMX512 addressable strips |
|
Certification |
CE / RoHS |
