How to connect DMX512 LED strips, diffuse reflection blocks, and flexible wall washer lights to a DMX512 controller and transformer, explained with diagrams.

DMX512 Fixture Wiring – 3 Steps

1. Check the arrow direction​

   Make sure the signal flow follows the arrow — always connect OUT → IN.

2. Connect the fixture’s power wires to the transformer/power supply​

   Match L, N, and PE (ground) correctly; confirm voltage and polarity before powering on.

3. Connect A / B / GND to the controller terminals​

   Wire the DMX signal lines (A, B, and GND) to the corresponding terminals on the DMX controller or decoder.